2004R
700R4
4L60E
'81+ 4-SPEED AUTOMATIC TRANSMISSIONS:
TCC APPLY VALVE KIT
- NON-PWM ONLY
- STEEL VALVE WITH TEFLON SEAL
- SONNAX 77805-K
FITS:
- 2004R '81-'90 (non-PWM ONLY)
- 700R4 '82-'93 (non-PWM ONLY)
- 4L60E '93+ (non-PWM ONLY)
-
Hardened steel valve matches OE material
-
PTFE seal eliminates cross leaking of converter signal oil and converter feed oil
-
These improved TCC apply valves with PTFE seals will eliminate bore cross leakage.
- Excessive pump bore-to-valve clearance allows TCC signal oil to leak past the spool, preventing lockup or causing lockup to disengage when hot. Additionally, converter feed can leak past the excessive clearance, combine with signal oil and cause premature lockup.
- Symptoms:
- Code 1870
- Falls out of lockup when hot
- Fluid blown out fill tube
- Lockup immediately after 2nd gear
- No lockup
- WARNING: This part only fits non-PWM units, and mismatching PWM and non-PWM valves will cause rapid converter failure.
- Identifying PWM vs. Non-PWM Units : If the OE valve features double spools at the location indicated in the photo above, you are working on a non-PWM unit. If the OE valve features one spool, you are working on a PWM unit and must use Sonnax TCC apply valve kit 77805E-K. Do not rely on the OE valve material (steel vs. aluminum) to determine for whether the unit is non-PWM, as some early PWM pumps also used steel TCC valves.
- PHOTO SHOWS ACTUAL TCC APPLY VALVE KIT
- We Ship Every Weekday From Warehouses Nationwide. Most Orders Are Delivered Within TWO To FIVE Business Days In The Continental U.S.
- FREE SHIPPING TO ALL 50 U.S. STATES & PUERTO RICO!
