GEAR FLUID SUPPLEMENT BY LUBEGARD™ 8oz. FOR ANY GEAR FLUID M465G

GEAR FLUID SUPPLEMENT BY LUBEGARD 8oz. FOR ANY DIFFERENTIAL, MANUAL TRANSMISSION OR TRANSFER CASE REQUIRING GEAR FLUID

SKU:
M465G
|
UPC:
083137309031
Condition:
New
Availability:
Usually ships in 24 hours
$13.88
$16.95
(You save $3.07 )
Bulk Pricing:
Buy in bulk and save

Bulk discount rates

Below are the available bulk discount rates for each individual item when you purchase a certain amount

  • Buy 3 - 4 and get 8% off
  • Buy 5 - 6 and get 10% off
  • Buy 7 - 8 and get 15% off
  • Buy 9 - 12 and get 20% off
(1 review) Write a Review

GEAR FLUID SUPPLEMENT

WITH LXE® Technology

 BY LUBEGARD™

m465g-lubegard-gear-fluid-supplement.jpg

m465g-heat-chart.jpg 

 

  • FOR USE IN ALL DIFFERENTIAL, MANUAL TRANSMISSIONS, MANUAL TRANSAXLES, TRANSFER CASE, AND FINAL DRIVES THAT REQUIRE GEAR OIL

  • Reduces drive train power loss
  • Lowers temperature and extends fluid life
  • Improves heat transfer from the fluid to the case wall and out the
    gear box
  • Improves all cold weather stiffness
  • Improves all manual & synchromesh transmission shifting characteristics
  • Reduces tooth drag and absorbs shock loads, thus improves the life of all gear units
  • Lowers friction on bearings and gears with high wiping stresses, especially hypoid gears
  • Minimizes oxidation and varnish deposits
  • Suppresses lubricant foaming
  • Safe for new MTF Fluids
  • Increases power transfer, reduces energy consumption
  • Decreases equipment operating and maintenance costs
  • LUBEGARD® GEAR FLUID SUPPLEMENT PROVIDES:
  • MORE POWER:
  • Reduces back-lash frictional (i.e. tooth) drag in differentials allowing more horsepower to the wheels.
  1. LOWER OPERATING TEMPERATURES:
    1. Reduces rolling and sliding friction in the gears.
    2. Reduces friction between the bearing rolling elements and their separators.
    3. Improves heat transfer from the fluid to the case wall and out of the gear box.

 LONGER EQUIPMENT LIFE:

  1. Reduces wear on gears and rolling elements.
  2. Lowers operating temperature and prolongs fluid life.
  3. Enhances the stability of the gear oil.
  4. Contains no shear-sensitive viscosity components.
  5. Will not cause sludge or varnish.
  6. Contains no harmful solid lubricants or corrosive chemical enhancers.

ECONOMY:

  1. Ratio used is at 3 fluid oz. to a quart = 1 part in 10.
  2. Saves on downtime by extending gear fluid changes.

 

  • SEE OUR BULK PRICING FOR $AVING$!
  • FREE SHIPPING TO ALL 50 U.S. STATES & PUERTO RICO!